Commercial network & data cabling for Melbourne workplaces
EDN installs network cabling, data points, ethernet ports and structured cabling systems for commercial sites across Melbourne. ACMA registered cablers and licensed electrical contractors, working with builders, IT providers, facilities teams and business owners who need cabling installed neatly, tested properly and ready for day one.
Call 1800 353 232 or request a quote below.
Registered, licensed and built for commercial work
When a business relies on its network, cabling is not an add-on. Poorly planned or badly terminated cabling means slow connections, dropouts, messy comms racks and expensive rework later.
- ACMA registered data cablers
- Licensed and insured electrical contractors
- Offices, fitouts, warehouses, retail and industrial sites
- Data points, ethernet ports, comms racks, patch panels and structured cabling
- Cabling for CCTV, access control, intercoms and security systems
- Molex Certified structured cabling with warranty options
- DSX-8000 testing, labelling and documented handover
Network cabling installation for offices and commercial buildings
Moving into a new tenancy, upgrading an existing network or adding outlets for staff and equipment – EDN installs the cabling infrastructure the business runs on. That covers ethernet runs, patch panel termination, comms rack cabling, outlets, cable management, testing and labelling, planned around the site layout and future maintenance.
Network cabling services include:
- Network cabling for offices and commercial sites
- Ethernet cable installation
- Comms rack cabling and patch panel termination
- Network outlet installation
- Structured cabling for new fitouts and upgrades
- Data rack installation and tidy-ups
- Cabling pathways for CCTV, access control and related low-voltage systems
- Labelling, testing and documentation
Data cabling installation – data points, outlets and structured systems
New data points, relocated outlets, extra ethernet ports at work areas, or a full structured cabling system. If the office layout has changed, staff need reliable wired connections, or the existing cabling is messy and undocumented, EDN will assess the site and provide a practical plan. The aim is simple: clean cabling, reliable connections and a system that is easy to manage after handover.
Suited to offices, shops, warehouses, workshops, medical and allied health spaces, education sites, commercial tenancies and industrial facilities.
Data cabling installation can include:
- Data point and ethernet port installation, including in existing walls and work areas
- New outlets for desks, offices, printers, phones, WiFi access points and equipment
- Cat6 and Cat6A cabling
- Patch panel and data rack termination
- Cable testing and labelling
- Office fitout data cabling
- Cabling for CCTV cameras, access control doors and security devices
Ethernet port and data point installation
Many enquiries are not for a full rebuild. Sometimes it is a handful of extra points, cabling for new desks, or a wired connection for equipment that cannot rely on WiFi. EDN can work from an IT provider’s requirements, a builder’s scope, a site plan or a walkthrough of what needs connecting.
Suitable for:
- Adding ethernet ports to an existing office
- Data points for new desks or workstations
- Moving outlets after a layout change
- Connecting printers, phones, access points, CCTV, access control or control equipment
- Improving reliability where WiFi is not suitable
- Preparing a tenancy before staff move in
Office network setup and commercial fitout cabling
For new offices, relocations and fitouts, EDN delivers the physical network layer before the team moves in: data cabling, outlets, rack setup, patch panel termination, cable management and coordination with the IT provider. Builders and project managers can send project documentation or book a site visit to clarify scope before quoting.
Office network setup can include:
- Network cabling for new office fitouts
- Data outlets for workstations and meeting rooms
- Comms rack and patch panel setup
- WiFi access point cabling
- Printer, phone and equipment outlet cabling
- CCTV and access control cabling as part of the wider fitout
- Cable tray, conduit and cable management
- Coordination with IT providers, builders and site managers
Structured cabling for commercial sites
Structured cabling replaces scattered, undocumented runs with a system that is installed, terminated, labelled and arranged so it can be maintained and expanded. EDN installs structured cabling for offices, warehouses, retail tenancies, schools, clinics, workshops and comms rooms. Where a project needs a certified system or a Molex-backed warranty, EDN is a Molex Certified Installer.
Cabling for CCTV, access control and security systems
CCTV cameras, access control doors, intercoms and alarm equipment all need cabling pathways, comms rack coordination and connection points. Because EDN delivers security as well as data, these are planned alongside the main cabling scope rather than bolted on later. Mention them in your enquiry and the full site requirement is reviewed together.
Why choose Electrical & Data Networks?
Commercial trade experience
EDN works across commercial electrical, data, communications and security installations, so the team understands active worksites, fitout programs, access requirements and coordination with other trades.
ACMA registered cablers
Telecommunications cabling in Australia must be done by registered cablers who understand the compliance requirements. EDN’s are.
Neat, serviceable installations
A good cabling job is reliable now and understandable later: tidy routing, sensible termination, clean racks and clear labelling.
Electrical, data and security in one team
Where data cabling overlaps with power, access control, CCTV, alarms, intercoms or broader fitout works, EDN handles the lot.
Service area
EDN services commercial clients across the Melbourne metropolitan area and regional Victoria, with interstate support for multi-site rollout programs.
Request a network or data cabling quote
Tell us what needs installing, where the site is, and whether you have plans, photos or a scope. If the project also includes CCTV, access control or intercom cabling, include that too. For urgent enquiries, call 1800 353 232.
Frequently asked questions
What is an ACMA registered data cabler and why does it matter?
An ACMA registered cabler is registered to perform telecommunications cabling work in Australia. Data and communications cabling is not just low-voltage wiring anyone can install – it has rules, standards and practical requirements for safe, compliant work.
What is the difference between data cabling and network cabling installation?
The terms overlap. Data cabling usually means the physical cabling and outlets that carry data around a building. Network cabling installation is the broader service of installing that cabling so computers, phones, access points, printers and comms racks connect reliably.
How long does a data cabling installation take?
It depends on site size, number of points, ceiling and wall access, distance back to the comms rack, and whether the work is part of a larger fitout. Small additions can be done quickly. Larger office or warehouse installations usually need a site visit or drawings before a realistic timeframe can be confirmed.
Can you install data points and ethernet ports in an existing office?
Yes, subject to site access and cable pathway options. This is common when desks move, staff are added, WiFi is unreliable, or equipment needs a fixed wired connection.
Can you also assist with CCTV, access control or security cabling?
Yes. EDN handles network and data cabling alongside CCTV, access control, intercoms, alarms and comms racks, which is useful on office fitouts, warehouse upgrades and projects where several low-voltage systems need to be coordinated.
What is structured cabling and do I need it?
Structured cabling is an organised system that connects outlets around a site back to a central comms rack or patch panel. It suits businesses that want a network that can be tested, labelled, maintained and expanded over time.
Do you work on data centre or server room cabling?
EDN handles commercial comms rooms, server racks, patch panels, rack cabling and structured cabling for business network infrastructure. For specialist data centre requirements, send the scope and EDN will confirm whether it suits the team.
How much does data point installation cost per point?
Pricing depends on the site, cable pathways, outlet locations, ceiling access, wall type, rack location, testing requirements and total number of points. For commercial work, the most accurate approach is a quote with site details, drawings or photos.
What areas of Melbourne do you service?
Commercial clients across the Melbourne metropolitan area and regional Victoria – offices, retail sites, warehouses, workshops, commercial tenancies and industrial facilities.
Are you licensed electricians as well as data cablers?
Yes. EDN is an electrical and data contractor, which matters on commercial projects where data cabling, power, security, CCTV, access control or fitout works need to be coordinated by one team.
Ready to get your network cabling sorted?
Speak with EDN about commercial data cabling, network cabling, ethernet ports, data points, comms racks, CCTV cabling, access control cabling or office network setup. Call 1800 353 232 or request a quote.